Skip to content

Inspection of limestone silo surface preparation before application of coatings

Carrying out the inspection

  • Light level measurement according to SSPC-Guide 12
  • evaluation of steel substrate according to ISO 8501-3
  • surface contamination with oil and grease according to SSPC-SP1
  • Cleanliness of the blasted surface according to ISO 8501-1
  • evaluation of the achieved profile according to ISO 8503-2
  • profile roughness measurement according to ASTM D4417-Method B
  • contamination of the surface with soluble impurities ISO 8502-6 and ISO 8502-9
  • determination of residual dust according to ISO 8502-3
  • measurement of climatic conditions at the application site
  • preparation of the protocol and final inspection report

CORROTECH ENGINEERING s.r.o. carries out inspections and evaluations of equipment from the point of view of corrosion, not only in the course of its applications, but also as a separate service to clients. We have our own team of regularly trained corrosion inspectors and corrosion engineers who hold international certifications such as FROSIO, AMPP (NACE, SSPC) and APC. As a company we are a member of the Association of Corrosion Engineers (AKI). Equipment inspections are also carried out as high rise work with rope access. We offer complete inspection and consulting services in the field of corrosion protection surface treatments, including the preparation of expert opinions and proposals. We are ready to issue test reports with the output of measured values, photo documentation and all other requirements of the inspection report. We also issue inspection reports and reports in English or German with all internationally required parameters.